This polypropylene banner film is highly tear-resistant and water-resistant.
The matte finish provides a wide viewing angle and is scratch-resistant. Lamination
is not needed but can be used to provide additional image protection. Pigment
inks provide high levels of water resistance. Dye inks can be used to increase
color gamut, however, water-resistance may be reduced.
TECHNICAL PROPERTIES
Caliper/Gauge: 9 mil Ink: Dye & Pigment
Weight: 140g Opacity: 92%
Adhesive: N/A Gloss (60_): 2
Availability: 24", 36", 42", 50", 60" Whiteness: 100
Printing Environment: 60-80_ F, 50% Relative Humidity
Ideal Storage Conditions: 70_, 50% Relative Humidity, store in original packaging
Shelf Life: One year at Ideal Storage Conditions
APPLICATION GUIDELINES
"Printing Tips:
Pigment inks are recommended to achieve high levels of water-resistance. Dye-based
inks can be used to increase color gamut, however, water-resistance will be
decreased. An ICC profile and RIP are recommended."
"Finishing/Mounting Recommendations:
For added surface protection against dirt and abrasion, a pressure sensitive
laminate, low temperature thermal laminate or liquid laminate can be applied
to the product. If low-temp laminate is preferred, it is recommended to use
a laminate with an activation temperature at less than 190_F. Standard, pressure-sensitive
mounting adhesive is recommended."
"Main Applications:
Indoor/Outdoor banners, Trade show displays, pop-up banner stands, POS/POP displays"
|