Chip Resetter for cartridges of Wide Format Epson Printers

Chip Resetter for cartridges of Wide Format Epson Printers

No reviews yet Write a Review
$26.59 $19.94
(You save $6.65)
SKU:
IA-MP-EP-388
Shipping:
Calculated at Checkout
This recommended MT-388 refill ink resetting system is mainly oriented to erase data of chip IC on the Large-Format inkjet Epson™ printers and then reset the chip on the cartridge into a full mode.
You can reset your chip and keep working with your cartridge if it has one of the compatible chips mentioned below.
Please notice that we do not provide instructions on how to refill original catridges .
However, Macro Enter has the machines to refill your originals. Just call us and we will help you with that.

MT-388 Resetter Compatibility:
1) Compatible with the following Epson Printers: Epson Stylus Pro 4000/4800/4880/7600/7800/7880/9600/10000/10600.
Call us if you need a resetter for a different model.
2) Compatible with the following Epson intelligent chips: T543100/ T543200/ T543300/ T543400/ T543500/ T543600/ T543700/ T543800/ T545100/ T545200/ T545300/ T545400/ T545500/ T545600/ T544100/ T544200/ T544300/ T544400/ T544500/ T544600/ T544700/ T544800/ T5449011/ T502011/ T501011/ T500011/ T504011/ T503011/ T511011/ T514011/ T513011/ T512011/ T512011/ T516011/ T515011
Specifications:
This MT-388 refill ink resetting system, main oriented erase data of chip IC on the Large-Format inkjet Epson printers, and then reset the chip on the cartridge into a full mode.
In this way the empty cartridge can be reused after refilling. It will save up to 90%.
MT-388 refill ink resetting system is versatile. It can automatically identify the type of ink cartridge and reset chip on the cartridge into a full mode.
Resetting Instructions:
1) Align the chip to the correct notch on the resetter unit so that the chip contacts and the pins on the resetter meet.
2) Keep the two units in firm contact. If the red light is blinking, the two units are in contact.
3) If the red light turns to green, the reset operation has been successful.
4) Cartridge is now ready to be refilled and used.

Trouble Shooting:
1) After the red LED flash, it stays on and doesn't turn green:
a) The pins on the resetter are not in good contact with the chip on the cartridge or maintenance tank. The contact may be dirty or oily.
b) If the ink cartridge is not an original Epson brand ink cartridge, the chip on that cartridge may not be compatible with the resetter.
c) If the ink cartridge is an original Epson™ brand ink cartridge, the chip may be burned out or Epson™ may have changed the chip design.
But MT388 still can reset the chip to a fulfill level, only that the green light won't turn on.
2) The printing quality is not good;
a) The quality of the ink you are using may be inferior. We recommend using inks that specifically match to Epson's original colors and other characteristics.
(Especially if you are printing digital photographs)
b) Air bubbles entrapped in the ink. To avoid this, inject the ink slowly. Also allow the cartridge to rest for 24 hours with the ink exit nozzles facing down before use.

The chip resetter tool for Epson stylus printers will work with our refillable cartridges or even original Epson cartridges.
Insert the chip resetter tool so that each of the pins touch one of the contacts on the chip.
You will see a red light when you first press the button.

Continue holding the button until the light turns green. You have just reset your chip.
The chip resetter tool for Epson stylus printers will work with our refillable cartridges or even original Epson cartridges.
Insert the chip resetter tool so that each of the pins touch one of the contacts on the chip.
You will see a red light when you first press the button.

Continue holding the button until the light turns green. You have just reset your chip.